8
video.
4.1.1 Slide the slide switch to “OFF” to turn it
off and connect the camera to your PC via the
USB cable, it will go into U-disc mode. Open the
Micro SD card, create a TXT file in it, and
rename it to “Time”.
4.1.2 Open the TXT file, type in the time as
following format and then save the file:
[Y
ear/Mon
th/Dat
e]<A
space
is
required>[Hour:Minute:Second]
For example,
2016/06/01 12:00:00
Then, disconnect the camera from your PC,
slide the slide switch to “ON” to turn it on,
wait about 15s, the synchronized time will
update into camera.
4.2.1 Connect the camera to your computer via
USB cable, it will go into U-disc mode.
4.2.2 Press “Power” button on the remote
controller to get it into Webcam. Now, you can
To Next Page
Loading...