7
3.5.2 Connect the camera to your computer via
USB cable, it goes into U-disc mode, a
removable disk will appear, just like when you
insert a card reader into your PC USB port. Just
open it, you will find what you have recorded.
Also, you can remove Micro SD card from the
camera, and use your card reader to connect to
your computer.
4. Use More
The following are additional functions of the
camera. The functions stated below are not
easy to set up and use. Just follow the steps
accordingly.
Take note that you should sync recording time
before recording video. Once reset, the camera
will go back to factory settings. You need to
sync it again.
After syncing recording time, the accurate time
when the video was recording displays in the
To Next Page
Loading...