Sappywoon Hidden Camera Alarm Clock - Record Sound; View What You Recorded

6
When a movement is detected, the camera will
start capture video. It will save a video every
3min. If no movement is detected, the camera
will go back to motion detection standby
mode.
3.3.3 Stop recording: Press “Motion Detection
Video Recording” button again, the blue light
turns on, it will go back to standby mode.
3.4
Record
sound
3.4.1 Turn on the camera. Press “Power”
button on the remote once to get it into
standby mode.
3.4.2 Start recording: Press “Sound” button,
the blue light will blink for twice then disappear,
it will start recording sound.
3.4.3 Stop recording: Press “Sound” button
again, the blue light appears, it will go back to
standby mode.
3.
5
View
what
you
recorded
3.5.1 Slide the slide switch to “OFF” to turn it
off.