To Next PageTo Next Page
Need help?Do you have a question about the Sartorius BCE6202i-1 Series and is the answer not in the manual?
General| Capacity | 6200 g |
|---|---|
| Readability | 0.01 g |
| Pan Size | 180 mm |
| Calibration | External |
| Display | LCD |
| Repeatability | 0.01 g |
| Linearity | ±0.02 g |
| Weight | 4.2 kg |
| Connectivity | RS-232 |
| Housing | Plastic |
| Operating Temperature | 10°C to 30°C |
| Stabilization Time (typical) | 2 seconds |
Specifies the device's purpose, acceptable environments, and restrictions on modifications.
Highlights the necessity of qualified personnel for safe device handling and identifies target groups.
Emphasizes the serious consequences of failing to adhere to manual instructions.
Stresses operating the device only when safe and in perfect working order, and outlines damage response.
Details hazards related to electrical equipment, including damage, unauthorized work, and power supply.
Outlines immediate actions to take in case of danger to personnel or equipment.
Advises wearing PPE when required by the workplace or process to mitigate risks.
Details the required ambient conditions and setup surface features for proper installation.
Details how to assemble and select the correct power plug adapter for the power supply unit.
Provides instructions for connecting the power supply unit to the balance and the mains outlet.
Covers settings for internal and external calibration, including isoCAL function.
Details parameters within the SETUP/BALANCE menu, such as AMBIENT, APP FILT., STABIL., ZER./TAR., and AUTOZER.
Explains UNIT, DISP.DIG., CAL./ADJ., CAL.SEQ., ISOCAL, and EXT.CAL. parameters.
Describes the GEN.SERV. menu for resetting system settings to factory defaults.
Configures RS232 interface parameters for data recording, baud rate, parity, stop bits, and data bits.
Configures USB interface parameters for data recording, baud rate, parity, stop bits, and data bits.
Covers settings for menu access, signal sounds, key locks, external keyboard functions, and power modes.
Configures data output via COM/SBI, including output mode, cycle, format, and auto-taring.
Configures print parameters for data output, including activation, format, initialization, GLP printouts, and auto-taring.
Configures direct PC data transfer settings, including decimal separators and output format.
Configures settings for the 'Weigh' application, including unit toggle, recall, application filter, and ambient conditions.
Configures settings for the 'Count' application, focusing on resolution and reference sample updating.
Configures decimal places for the result display in the 'Weighing in Percent' application.
Configures component printout settings for the 'Net-total' application.
Details triggers for automatic isoCAL function and the process for conformity-assessed models.
Provides step-by-step instructions for internal calibration and adjustment, with and without automatic adjustment.
Details the procedure for external calibration and adjustment using specified weights.
Guides users through zeroing, taring, and placing samples for accurate weight measurement.
Lists common warning messages, their causes, remedies, and corresponding manual sections.
Provides solutions for common issues like blank display, unstable readings, and incorrect weight values.
