Using individual ID codes
Example Enter ID code names. “Batch number" and “Customer" should be entered for ID 1
and ID 2.
e ... ) t Open menu (see page 35) .
k k ... ) t Select and open SETUP.
k k ... ) t Select and open PRINT.
) t Open PROTOC..
) t Open HEADLIN. .
k k ... ) t Select and open ID 1.
k p ... t Enter a name for the first ID (using the k and p keys or use the number
block), e.g. “batch number."
) t To save the entry, press the ) key.
k ... ) t Select and open ID 2.
k p ... t Enter a name for the 2nd ID, e.g. “customer."
) t To save, press the ) key.
( ( ... t To exit the sub-menu, press the ( key several times.
52 Operating Instructions Combics Indicators
Operation
To Next Page
Loading...
