Need help?Do you have a question about the Sartorius combics 2 and is the answer not in the manual?
General| Type | Bench Scale |
|---|---|
| Display | LCD |
| Protection | IP65 |
| Interfaces | RS-232, USB |
| Calibration | External |
Provides instructions for connecting weighing platforms, referencing the 'Getting Started' section.
Details connecting analog Sartorius platforms or DMS load cells to the WP1 input.
Details on powering the device, voltage requirements, and proper outlet connection.
Enables access to additional menu items for calibration and adjustment.
Step-by-step guide on how to activate the service mode using the menu.
Adjusts parameters for the load cell, defining the instrument as a scale.
Details parameters like accuracy class, range selection, and scale interval.
Procedural guide to configuring the A/D converter, including service mode activation.
Details how to enter weights for adjustment and linearization processes.
Instructions on how to turn the indicator on and the initial self-test process.
Explains how to switch to and navigate the menu system.
Instructions on using keys to move through menu levels and select items.
Steps to secure the Setup menu and device parameters with a password.
Details the basic weighing application and its features.
Covers password protection, acoustic signals, keypad settings, and automatic shutoff.
Defines calibration and adjustment to ensure displayed values match actual weight.
Provides an overview of available applications and their functions.
Application for determining part counts based on reference weight and quantity.
Measures length, surface, or volume of parts with similar specific weights.
Calculates averages from multiple weighing operations for unstable conditions.
Obtains weight readouts in percent relative to a reference weight.
Checks if samples match a target value or tolerance range.
Describes defining target values and tolerance limits for checkweighing.
Determines if a sample weight falls within defined weight classes.
Adds weights to a totalizing memory, saving net values and item counts.
Weighs components into a defined total, saving each component in net-total memory.
Defines individual measurement printouts, including headers and GMP compliance.
Explains how to password-protect device and application parameters.
Describes how to configure the instrument for legal metrology via a switch.
Guides configuring the interface as a COM port using Data Protocol menu item.
Specifies the command format for controlling instrument functions via the interface.
Describes the format for print job lines, including data headers and special codes.
Defines printout content, including headers, GMP compliance, and application data.
Lists and explains error codes and their causes and solutions.
Guidelines for performing repairs, emphasizing safety and authorized personnel.
Instructions for cleaning the indicator, emphasizing safe agents and methods.
Criteria indicating when safe operation is no longer ensured and actions to take.
Technical specifications for the ADC interface, including resolution and input signals.
Technical specifications for the 10,000e ADC interface, including resolution and input signals.
To Next Page
