Deleting the Preload
Setup information – Deleting the preload when weighing in legal metrology is only possible when
the menu access switch is open.
– The “Set Preload" function (menu item 1.9.8) must be allocated to the J key
(see page 141).
3
Once the preload has been deleted, the J key must be reallocated back to its
original function in the Setup menu, e.g. external calibration/adjustment with
default weights (Setup menu item 1.9).
Procedure
t Remove the preload weight from the weighing platform.
) hold t Start the “Delete Preload" function.
y After a short period of time the preload will be deleted and the indicator will
automatically switch back to weighing mode.
Operating Instructions Combics Indicators 29
Configuring Weighing Platforms
To Next Page
Loading...
Need help?
General
