Need help?Do you have a question about the Sartorius MA45 and is the answer not in the manual?
General| Brand | Sartorius |
|---|---|
| Model | MA45 |
| Category | Measuring Instruments |
| Language | English |
Details risks associated with specific sample types like flammable, explosive, toxic, or corrosive substances.
Offers guidance on selecting a suitable location and setting up the analyzer for optimal performance.
Details the correct order for positioning the components of the moisture analyzer.
Highlights crucial safety measures related to grounding and extension cords for electrical connections.
Explains the purpose and method for leveling the analyzer to ensure accurate measurements.
Details how to turn on the analyzer and operate the sample chamber cover.
Describes the structure and components of the display for analysis and test functions.
Guides users through navigating and setting parameters in the analyzer's menu structure.
Explains how error codes are indicated and where to find detailed explanations.
Guides users on how to set, change, or delete the password for parameter protection.
Provides instructions on how to reset all device parameters to their factory defaults.
Details how to set parameters for the drying program, including temperature and shutoff criteria.
Details how to adapt the analyzer to product requirements by configuring parameters for each program.
Presents an overview of factory and user-defined drying parameters for programs P1, P2, and P3.
Explains the two available heating programs: Standard drying and MA30 mode.
Describes the conditions under which the analysis starts after setting the initial weight.
Details the three modes for ending analysis: fully automatic, semi-automatic, and timer mode.
Guides users through configuring the drying parameters for the specified example analysis.
Covers calibration, adjustment, and hardware tests for the weighing system.
Explains how to calibrate and adjust temperature settings of the drying unit using specific sets.
Defines calibration and adjustment purposes and lists features for the weighing system.
Provides a step-by-step guide to activating hardware tests for the analyzer.
Details the process for testing Serial Binary Interface communication.
Details the procedure for testing the heater function of the moisture analyzer.
Describes the nine sections of the analyzer display and the information they provide.
Warns about potential damage due to incorrect RS-232 cable pin assignments.
Provides a detailed list of pin assignments for the 25-position D-Submini connector.
States that repair work must be performed by trained service technicians.
Provides instructions on how to clean the analyzer, emphasizing caution with liquids and cleaning agents.
Details the specific steps for cleaning the heating unit and temperature sensor.
Suggests a checklist for qualified technicians to inspect the analyzer's safety features.
Provides detailed technical specifications for the Sartorius MA45 moisture analyzer.
Guides on how to enter, change, or delete the password for parameter protection.
Guides users on selecting a drying program (P1, P2, or P3) using the PROGRAM function.
Explains how to start the analysis by using the START function or closing the sample chamber.
Guides on selecting specific menu items and their corresponding settings.
To Next Page
