Need help?Do you have a question about the Sartorius MA35M-115N and is the answer not in the manual?
General| Model | MA35M-115N |
|---|---|
| Manufacturer | Sartorius |
| Category | Measuring Instruments |
| Type | Moisture Analyzer |
| Maximum Capacity | 35 g |
| Weighing Pan Size | 90 mm |
| Temperature Range | 40 °C to 160 °C |
| Temperature Increments | 1 °C |
| Heating Technology | Halogen |
| Display | LCD |
| Interface | RS232 |
| Drying Programs | 5 |
| Readability | 0.001 g |
| Sample Weight (min.) | 0.5 g |
| Power Supply | AC 100-240 V |
Ensures correct voltage connection and safe power cord usage.
Highlights using approved accessories and protecting the analyzer from liquids and damage.
Procedure for handling damaged equipment to prevent immediate use and potential harm.
Warns about severe burns due to hot components like the heating unit and sample pan.
Lists hazards like poisoning, caustic burns, and corrosion from sample materials.
Covers analyzer overview, unpacking, conditioning, storage, and initial setup.
Details power/peripheral connections, warmup, leveling, and sample preparation.
Focuses on sample preparation, pan usage, and distribution for accurate analysis.
Explains the analyzer's use and differentiates between absolute and deductive moisture determination.
Describes thermogravimetry and the IR heating process, including sample interaction.
Discusses sample preparation, heat generation, and optimal drying process settings.
Details the function of each key based on brief press or press-and-hold actions.
Explains the different areas of the display and the meaning of various symbols and indicators.
Guides through setting interface, printing, language, and factory reset options.
Provides a step-by-step example of changing the device language setting.
Explains how to adjust temperature, end of analysis, and display mode for drying programs.
Walks through performing an analysis with a pre-defined drying time.
Explains the content of printouts, including header, current data, and footer.
Refers to separate instructions for adjusting the heating element.
Explains calibration and adjustment for the weighing system's accuracy.
Step-by-step guide for externally calibrating the weighing system with a factory-defined weight.
Explains the function of the interface port for printers/computers and preparation steps.
Warns about incompatible RS-232 cable pin assignments and potential damage.
Details the pin assignments for the 25-position D-Submini RS-232 female connector.
Lists common error codes, their causes, and suggested solutions for troubleshooting.
Information on regular servicing by technicians and the hazards of untrained repairs.
Instructions for cleaning the analyzer, including warnings about detergents and power disconnection.
Detailed steps for cleaning the heating unit and temperature sensor, with safety warnings.
Guidelines for determining when safe operation is no longer warranted and required actions.
Information on environmentally friendly disposal of packaging and the equipment itself.
Lists key specifications like weighing capacity, readability, heating range, and data interface.
Specifies operating temperature, humidity, and altitude requirements for the analyzer.
Lists optional accessories such as sample pans, filters, printers, and adjustment sets with their order numbers.
States compliance with European directives and standards for the moisture analyzer.
Declares compliance with FCC rules, including conditions for operation and interference.
Certifies the moisture analyzer's compliance with US and Canadian safety standards.
To Next Page
