) t To apply a character, press the ) key.
t Enter all additional characters of the password as described above.
t Press and hold the ) key to save the password.
( Use the ( key to exit the menu level to make additional settings if required
or
) Press the ) key longer than 2 seconds to exit the menu.
Changing or Deleting Passwords
t Open the U-CODE menu item in the SETUP menu as described above.
y The old password must be entered to change or delete a password.
t To change a password, overwrite the old password.
t To delete a password, enter spaces and press the ) key.
Operating Instructions Combics Indicators 39
Operating Design
To Next Page
Loading...
Need help?
General
