appl
Z nm Neutral Measurement
3. 5.
Numeric menu as for Weighing Minimum Load for Automatic Taring and Automatic Printing
3. 6.
Numeric menu as for Counting Minimum Load for Initialization
3. 7. Automatic Taring: 1st Weight Tared
3. 7. 1 * Off
3. 7. 2 On
3. 8. Start Application with Most Recent Application Data when Combics is Switched On
3. 8. 1 Automatic (on)
3. 8. 2 * Manual (off)
3. 9. Resolution for Calculation of Reference Value
3. 9. 1 * Display resolution
3. 9. 2 Display resolution + 1 decimal place
3. 9. 3 Display resolution + 2 decimal places
3. 9. 4 Internal resolution
3.10. Decimal Places for Display of Results
3.10. 1 * None
3.10. 2 1 decimal place
3.10. 3 2 decimal places
3.10. 4 3 decimal places
3.11. Storage Parameter
3.11. 1 * At stability
3.11. 2 At increased stability
3.13. Reference Weighing Instrument
3.13. 1 * Off
3.13. 2 To weighing instrument WP1
3.13. 3 To weighing instrument WP2
3.25. Tare function
3.25. 1 * The tare value entered is added to the stored tare value
3.25. 2 Overwritable tare value
9. 1. Factory Settings for All Application Programs
9. 1. 1 Yes
9. 1. 2 * No
V Averaging (Animal Weighing)
3. 5.
Numeric menu as for Weighing Minimum Load for Automatic Taring and Automatic Printing
3. 6.
Numeric menu as for Counting Minimum Load for Automatic Start
3. 7. Automatic Taring: 1st Weight Tared
3. 7. 1 * Off
3. 7. 2 On
3. 8. Start Application with Most Recent Application Data when Combics is Switched On
3. 8. 1 Automatic (on)
3. 8. 2 * Manual (off)
3.18. Start of Averaging Routine
3.18. 1 * Manual
3.18. 2 Automatic
3.19. Animal Activity
3.19. 1 0.1 % of the animal/object
3.19. 2 * 0.2% of the animal/object
3.19. 3 0.5 % of the animal/object
3.19. 4 1% of the animal/object
3.19. 5 2% of the animal/object
3.19. 6 5% of the animal/object
3.19. 7 10% of the animal/object
3.19. 8 20% of the animal/object
3.19. 9 50% of the animal/object
3.19.10 100 % of the animal/object
3.20. Automatic Printout of Results
3.20. 1 * Off
3.20. 2 On
64
Configuration
To Next Page
Loading...