Sartorius CH1NE - Setup: Device Parameters; Weighing Instrument 1 Settings

Setup Device Parameters
Password prompt displayed, if a password is configured
Wp-1
i
Weighing Instrument 1
(Display designation of this menu level: 1)
rs-232 sbi-std, sBI-App, bpi-232* or adc-232 Menu parameters dependent on connected complete scale
(e.g., EA/EB model, FB/FC model, etc.)
rs-485 is-485* or adc-485 Optional: Menu parameters dependent on connected weighing platform
interm. * Built-in A/D Converter
1. 1. Adapting Weighing Instrument to Ambient Conditions (Adapt Filter)
1. 1. 1 Very stable conditions
1. 1. 2 * Stable conditions
1. 1. 3 Unstable conditions
1. 1. 4 Very unstable conditions
1. 2. Application Filter
1. 2. 1 * Final readout
1. 2. 2 Filling mode
1. 2. 3 Low filtering
1. 2. 4 Without filtering
1. 3. Stability Range
1. 3. 1 4 digit
1. 3. 2 1 digit
1. 3. 3 * 1 digit
1
)
1. 3. 4 2 digits
1
)
1. 3. 5 4 digits
1
)
1. 3. 6 8 digits
1
)
1. 4. Stability delay
1. 4. 1 No delay
1. 4. 2 * Short delay
1. 4. 3 Average delay
1. 4. 4 Long delay
1. 5. Taring
1
)
1. 5. 1 Without stability
1. 5. 2 * After stability
1. 6. Auto Zero
1. 6. 1 * On
1. 6. 2 Off
1. 7. Weight Unit 1
2
)
1. 7. 2 Grams /g
1. 7. 3 Kilograms /kg
1. 7. 4 Carats /ct
1
)
1. 7. 5 Pounds /lb
1
)
1. 7. 6 Ounces /oz
1
)
1. 7. 7 Troy ounces /ozt
1
)
1. 7. 8 Hong Kong taels /tlh
1
)
1. 7. 9 Singapore taels /tls
1
)
1. 7.10 Taiwanese taels /tlt
1
)
1. 7.11 Grains /GN
1
)
1. 7.12 Pennyweights /dwt
1
)
1. 7.13 Milligrams /mg
1
)
1. 7.14 Parts per pound /lb
1
)
1. 7.15 Chinese taels /tlc
1
)
1. 7.16 Mommes /mom
1
)
1. 7.17 Austrian carats /k
1
)
1. 7.18 Tola /tol
1
)
1. 7.19 Baht /bat
1
)
1. 7.20 Mesghal /MS
1
)
1. 7.21 Tons /t
1. 8. Display Accuracy 1
1. 8. 1 * All digits
1. 8. 2 Reduced by 1 decimal place for load change
1. 8. 3 Resolution reduced by 1 scale interval (e.g., from 1 g to 2 g or from 5 g to 10 g)
1. 8. 4 Resolution reduced by 2 scale intervals (e.g., 1 g to 5 g)
1. 8. 5 Reduced by 1 decimal place
1
)
1
) = Not available on instruments verified for use in legal metrology
2
) = Depends on weighing instrument model
68
Configuration