Sartorius CP12001S - Example: Determining Residual Weight in Percent

50 pages

To Next Page

To Previous Page

Template for Off-Center Loading (CP622)

Maßstab 1:1

Template for Off-Center Loading

CPA5202S-DS, CPA2202S-DS

| 45

Main Page

Table of Contents2
General Information3
Fundamentals at a Glance3
General Notes4
New Features Compared to the BP5
Models with Special Weighing Systems6
Auxiliary Service Tools, Equipment and Weights8
Accompanying Literature8
Function of the Keys9
Displaying the Hardware and Software Versions9
Access Lock Switch10
Menu Code Settings(Rel BAC 13.44 Version)13
Activating the BPI Mode15
Testing and Adjustment Sequence on Balances/Scales with Strain Gauge Systems16
Checking the Overload Stop16
Setting the Overload Stop16
Zero-Point Offset Adjustment17
Checking the Repeatability (Standard Deviation)18
Checking and Adjusting the Off-Center Loading18
Checking the Off-Center Loading Tolerances18
Procedure for Adjusting the Off-Center Loading Error (Strain Gauge)19
Span Adjustment21
External Adjustment21
Adjusting Linearity22
Adjusting External Linearity22
Lever Systems23
Testing and Adjustment Sequence on Balances/Scales with Double Lever Systems23
Checking the Overload Stop23
Checking the Repeatability (Standard Deviation)23
Checking and Adjusting the Off-Center Loading24
Checking the Off-Center Loading Tolerances24
Procedure for Adjusting the Off-Center Loading25
- Span Adjustment26
  - External Adjustment26
- Adjusting Linearity27
  - Adjusting External Linearity27
- Testing and Adjustment Sequence on Balances/Scales28
- Checking the Overload Stop28
- Checking the Repeatability (Standard Deviation)28
- Off-Center Loading Error28
- Checking and Adjusting the Off-Center Loading Error29
  - Checking the Off-Center Loading Tolerances29
- Span Adjustment31
Linearity33
- Checking the Linearity33
- Adjusting the Linearity33
- Overwriting the Internal Linearization Weight34
- Balances/Scales with Forked Lever Systems35
- Testing and Adjustment Sequence on Balances/Scales with Forked Lever Systems35
- Checking the Overload Stop35
- Checking the Repeatability (Standard Deviation)35
- Off-Center Loading Error37
  - External Adjustment38
- Linearity39
  - Checking the Linearity39
  - Adjusting the Linearity39
Calibration/Adjustment Data39

Sartorius CP12001S - Example: Determining Residual Weight in Percent

Table of Contents

Other manuals for Sartorius CP12001S

Related product manuals