Sartorius CP423S - Setting up the Balance;Scale; Balances;Scales with an Analytical Draft Shield Chamber

88 pages

To Next Page

To Previous Page

Setting up the

Balance/Scale

Balances/Scales with an Analytical Draft

Shield Chamber:

!Move the sliding lock on the back of the

draft shield to the right (open position)

§ Position the draft carefully on the

balance/scale

§ Secure the draft shield in position by moving

the sliding lock device on the back of the

balance/scale to the left while pressing down

gently on the floor of the draft shield

§ Place the components listed below inside the

chamber in the order given:

– Base plate

– Shield disk

– Weighing pan

– Gem tray (GC models only)

Other manuals for Sartorius CP423S