Sartorius CP622-0CE - User Manual

WCP5001-e07104
Service Manual
Sartorius Competence | Sartorius Gem
plus
CPA-, CP-, GC- und GP-Models
Electronic Semimicro-and Analytical Precision Balances and Precious Metal Scales
Including Service Specifi cations Sheets

Summary

Service Guide

Balance;Scale Checking Procedures

BPI Mode and Write-Protect Management

Explains activating/deactivating BPI mode and managing write-protect settings.

Maintenance and Components Overview

Function Service BPI Switch

Activating the BPI Mode

Step-by-step guide to activate the Binary Processor Interface (BPI) mode.

BPI Mode Cautions and Return to SBI

Testing and Adjustment Sequence on Balances;Scales with Strain Gauge Systems

Preparations and Overload Stop Adjustment

Zero Point Offset Adjustment

Explains how to adapt the A/D converter for zero point offset using voltmeter or software.

Repeatability; Off-Center Loading

Checking Repeatability (Standard Deviation)

Checking and Adjusting Off-Center Loading Error

Details how to check and adjust for off-center loading errors.

Checking Off-Center Loading Tolerances

Procedure for Adjusting the Off-Center Loading Error (Strain Gauge)

Filing for Front-Back Off-Center Loading Error

Instructs on filing thin sites for front-back error correction.

Filing for Back Off-Center Loading Error

Details filing procedures for back off-center loading error adjustment.

Adjusting the Off-Center Loading Error (Strain Gauge)

Filing for Right-Left Off-Center Loading Error

Guides on filing thin sites for right-left error correction.

Span adjustment

Adjusting Linearity

External Linearity Adjustment Procedure

Explains how to perform external linearity adjustment.

Linearity Adjustment Using Software

Details using service software for balance linearity adjustment.

Adjusting Off-Center Loading

Off-Center Loading Error Adjustment Procedure (Double Lever)

Details the procedure for adjusting off-center loading errors in double lever systems.

Filing Positions for Off-Center Loading Adjustment

Illustrates filing positions for correcting off-center loading errors.

Span Adjustment

External Adjustment Procedure

Details the external span adjustment procedure.

Overwriting Internal Calibration Weight

Explains how to overwrite the internal calibration weight using software.

Checking the Off-Center Loading

Off-Center Loading Tolerances and Adjustment (Monolithic)

Adjusting Off-Center Loading Error (Monolithic System)

Provides steps for adjusting off-center loading errors in monolithic systems.

3-Point Adjustment

Off-Center Loading Error Adjustment Procedure

Details the 3-point adjustment procedure for off-center loading errors.

Assembly and Data Cable Caution

Internal Calibration Weight Overwriting

Internal Span Adjustment Procedure

Details the procedure for internal span adjustment.

Linearity

Linearity Checking Procedure

Adjusting External Linearity

Manual Linearity Adjustment Procedure

Provides steps for manual linearity adjustment.

Overwriting the Internal Linearization Weight

Procedure for Overwriting Internal Linearization Weight

Guides on overwriting internal linearization weights.

Adjusting the Off-Center Loading Tolerances

Procedure for Adjusting Off-Center Loading Error

Error Messages

Error Code Explanations and Remedial Measures

Continues listing error codes, explanations, and remedial measures.

Sartorius CP622-0CE Specifications

General

Maximum Capacity	620 g
Display	LCD
Weighing Units	g, kg, oz, lb
Interface	RS-232
Operating Temperature	10 °C to 40 °C
Calibration	Internal (automatic or manual)
Power Supply	AC adapter or battery (optional)