8
Balances/Scales with a 3-sided
Draft Shield:
§ Place the draft shield on the balance/scale
with the cover opening in front on the right
§ Turn the draft shield clockwise until it is
firmly in position
§ Place the components listed below inside the
chamber in the order given:
– Base plate
– Pan support
– Weighing pan
$ Accessing the weighing chamber from the
side: Pull out the side panels one at a time
1
2
Connecting the Electronics Box to
Model CP225D (-0CE)
– Insert the connector on the cable in to the
socket on the electronics box
To Next Page
Loading...
Need help?
General
