Need help?Do you have a question about the Sartorius CP8201 and is the answer not in the manual?
General| Maximum Capacity | 8200 g |
|---|---|
| Readability | 0.1 g |
| Calibration | External |
| Display | LCD |
| Repeatability (Std. Dev.) | 0.1 g |
| Linearity | ± 0.2 g |
| Pan Size | 190 mm |
| Power Supply | AC Adapter |
| Stabilization Time (typical) | 2 seconds |
| Weighing Units | g, kg, ct, lb, oz, GN, dwt, ozt |
| Interface | RS-232 |
| Operating Temperature | 10°C to 30°C |
| Material | Stainless Steel |
Guidance on choosing a location and setting up the balance/scale for optimal performance.
Details on connecting the AC adapter and associated safety guidelines.
Step-by-step guide for performing internal calibration on models with built-in calibration weight.
Step-by-step guide for performing external calibration using external weights.
Procedure for adapting the balance/scale to ambient conditions using menu codes.
Program for weighing components to a defined total, with outputting total and individual weights.
Program to determine the number of parts with approximately equal weight.
Program for higher precision counting using a reference balance/scale.
Program to obtain weight readouts in percent relative to a reference weight.
Program for weighing unstable samples or under unstable conditions by averaging operations.
Parameters and settings for generating ISO/GLP-compliant printouts and records.
Detailed pinout for the female and male RS-232 connectors, including warnings.
To Next Page
