Factory Settings
Print manual/automatic: Individual
printout dependent on stability:
Manual at stability (menu code 6 1 2)
Line format:
Up to 6 characters at the beginning
of each line to identify the weight
or calculated value: Print net, tare, or
gross value, reference sample quantity,
or average piece weight with ID
(menu code 7 2 2).
Print application parameters:
Printout of one or more initialization val-
ues for the active application program:
On (menu code 7 1 2)
ISO/GLP-compliant printout:
No ISO/GLP-compliant printout
(menu code 8 10 1)
50
Auto print:
Automatic printout of weight values:
No default setting; see print manual/
automatic (menu code 6 1 2)
Automatic printout after each display cycle
(menu code 6 3 1), cannot be interrupted
by pressing p (menu code 6 2 2)
§ Set the following parameters:
See “Configuring the Balance/Scale”
To Next Page
Loading...
