Need help?Do you have a question about the Sartorius CPA6202P and is the answer not in the manual?
Guidelines for protecting the balance during transport and storage.
Procedure for checking the balance for any damage after unpacking.
Brief guidance on choosing a location and conditioning the balance.
Instructions for assembling components for the CPA2P model.
Instructions for assembling components for the CPA2P-F model.
Procedure for installing the draft shield on analytical balances.
Explanation of the balance display and its control keys.
Instructions for performing weighing below the balance using a hanger.
Specific procedures for external calibration of accuracy class II balances.
Steps for performing internal calibration and automatic adjustment.
Explanation of the automatic calibration and adjustment feature.
Detailed steps for performing external calibration of the balance.
How to print current balance parameter settings from the setup menu.
Guide to adjusting balance settings using menu codes.
Comprehensive overview of available parameter settings and their options.
Configuring measurement IDs, time, date, and display brightness.
Program for weighing multiple components into a defined total.
Program to determine the number of parts by weighing a reference sample.
Automatic updating of reference sample for optimized counting accuracy.
Using a reference balance for higher precision in counting.
Program to obtain weight readouts as a percentage of a reference weight.
Program for determining weights of unstable samples by averaging measurements.
Switching the display between two different weight units.
Default printout settings for manual/automatic operation and line format.
Generating printouts with ambient conditions and GLP-compliant data.
Default interface settings for transmission rate, parity, and handshake.
Notes on pin assignments and compatibility for interface connections.
How non-verified digits are identified on printouts.
Format of control commands sent to the balance via the interface port.
Detailed pin assignments for the female and male interface connectors.
Diagram illustrating the RS-232C/V24 cabling connections.
Information on Sartorius service contracts and repair procedures.
General instructions for cleaning the balance and its surfaces.
Specific instructions for cleaning stainless steel parts of the balance.
Specific steps for cleaning internal parts of the weighing chamber and draft shield.
Procedures for inspecting balance safety and when to contact service.
Technical specifications for CPA2P and CPA2P-F models.
Services offered for initial verification and optimal instrument use.
Details on EC verification services by authorized Sartorius technicians.
Information on maintaining verification validity and national regulations.
To Next Page
General