Data Input Format
You can connect a computer to your balance/scale to
send commands via the balance/scale interface port
to control balance/scale functions and applications.
A control command can have up to 4 characters. Each
character must be transmitted according to the settings
configured in the Setup menu for data transmission.
Format for Control Commands
Format: Esc ! CR LF
Esc: Escape
!: Command char.
CR: Carriage return (optional)
LF: Line feed (optional)
Command character ! Meaning
K Weighing mode 1
L Weighing mode 2
M Weighing mode 3
N Weighing mode 4
O Block keys
P Print
R Release keys
S Restart
T Tare and zero (combined)
U Tare (“tare only”)
V Zero
W External calibration/adjustment
(depends on menu setting)
9
To Next Page
Loading...
