Data Output Functions
Printing a Data Record
Purpose
You can generate a printout of weights as well as
other measured values and IDs for documentation
purposes. You can format the printout to meet
individual requirements.
Available Features
Print individual values
Line format: You can configure a data ID code
of up to 6 characters for each of the values
printed; this data ID code is printed at the
beginning of a line
Printouts are generated automatically or by
pressing p, depending on or regardless
of the balance/scale stability parameter.
You can have the following values output
automatically when using the application
programs if menu code 7 .1. 2 (printout with
data ID codes) is configured:
– Second tare memory: last net value
– Counting: Reference weight for one piece
(average piece weight)
– Weighing in percent:
Reference weight for the percentage selected
– Averaging: Result of measurement
3
To Next Page
Loading...
