Example: Counting parts of equal weight
Parameter settings: Applic.: Count. (menu code 2. 3.)
Step Key (or instruction) Display/Data output
1. Place empty container +
22.6 g
on the balance/scale
2. Tare the balance/scale
w 0.0 g
3. Add reference sample quantity
to container (in this example: 20 pcs)
4. Changing the reference
sample quantity:
b ref 10
pcs
5. Select reference sample quantity: Repeatedly: b
In increments of 1 (1, 2, 3, etc. to 100)
Press briefly
In increments of 10 (10, 20, etc. to 100)
b press ref 20
pcs
and hold
6. Confirm selected reference sample
u + 20
pcs
*
quantity and start application nRef 20 pcs
The current reference weight remains wRef 1.07 g
stored until a new reference is set
or the power supply is interrupted
7. Add desired number of pieces +
500
pcs
8. If desired, print quantity r Qnt + 500 pcs
9. Toggle display between 1.07 g
G
*
mean piece weight, weight, + 535.0 g
*
quantity Repeatedly: b + 500
pcs
*
10. Unload the balance/scale – 21
pcs
*
11. Repeat as needed, starting from
Step 7
12. Delete reference value
c 0.0 g
27
To Next Page
Loading...
Need help?
General