4
! Use only original Sartorius AC adapters:
– for Asia: 400081.1
– for the U.S.: 400314.1
Connecting the Balance/Scale to AC Power
§ Insert plug into the jack (located on back of the
balance/scale)
§ Plug the AC adapter into an electrical outlet
! LISTED power supply 11 V–21 V compliant with
NEC Class 2 output.
Below-Balance/Scale Weighing
A port for a below-balance/scale weighing hanger
is located on the bottom of the balance/scale.
§ Open the cover plate on the bottom of the
balance/scale.
§ Attach the sample (e.g., using a suspension wire)
to the hanger.
$ Install a shield for protection against drafts if
necessary.
To Next Page
Loading...
