Sartorius Entris II - Commands and Synchronization; Data Input Commands

4
Commands (Data Input Format)
You can connect a computer to your balance to
send commands via the balance interface port for con-
trolling balance functions and applications. The commands
sent are control commands and may have
different formats. Control commands consist of up to 13
characters. Each character must be transmitted according
to the settings configured in the operating menu for data
transmission.
Format for Control Commands
Format 1: Esc ! CR LF
Format 2: Esc ! # _ CR LF
Esc: Escape (optional)
!#: Command character
_: Underline
CR: Carriage Return
LF: Line Feed (optional)
Command
character
Format 1
! Meaning
? Loading the internal adjustment weight ¹
,
²
)
@ Lifting the internal adjustment weight ¹
,
²
)
kP Key PRINT output to all interfaces
K Ambient conditions: very stable
L Ambient conditions: stable
M Ambient conditions: unstable
N Ambient conditions: very unstable
O Block keys
P Print, auto print; activate or block
Q Beep
R Unblock keys
S Restart/self-test
T Zero/Tare command
U TARE key
V ZERO key
W Adjustment (depending on the menu setting) ²
)
Z Perform internal adjustment ¹
)
¹
)
= only for balances with internal weight
²
)
= may be inaccessible on verified balances
³
)
= only for Essential Line
⁴
)
= only for Advanced Line
Command
character
Format 2
!# Meaning
f0_ Function key V ³
)
f1_ Function key CAL ³
)
f2_ Function key ENTER ³
)
f3_ ZERO key
f4_ TARE key
s3_ CANCEL FUNCTION key
s9_ Create a screenshot on USB stick ⁴
)
x0_ Internal calibration ¹
)
x1_ Print model number
x2_ Print serial number
x3_ Print BAC software version (old notation)
x4_ Print APC software version (old notation)
x5_ Print balance ID
x20_ Print BAC software version (new notation)
x21_ Print APC software version (new notation)