Data output example: +123.56 g
Position 12345678910111213141516
+ 123 . 56 g CRLF
+ 123.5[6]*g CRLF
Position 1: Plus or minus sign or space
Position 2: Space or brackets*
Positions 3–10: Weight with a decimal point; leading zeros = space
Position 11: Space or brackets*
Positions 12–14: Unit symbol or space
Position 15: Carriage return
Position 16: Line feed
Output Format with 22 Characters
When data is output with an ID code, the ID code (consisting of 6 characters) precedes
the 16-character string described above.
These 6 characters identify the subsequent value.
12345678910111213141516171819202122
IIIIII+*DDDDDDDD *UUUCRLF
*****– ........ ***
* ********
I: ID code character U: Unit symbol
1
)
*: Space CR: Carriage return
D: Digit or letter LF: Line feed
Example:
12345678910111213141516171819202122
N + 123. 56 g CRLF
N + 123.5[6] g CRLF
1
) Depends on balance type; for example, not all units or characters are available on balances verified for use in legal
metrology.
*) Identification of non-verified digits:
Non-verified digits where e=d are identified by brackets (square) if you select the following setting:
Parameter settings: Communication mode: Universal printer (menu code 5 5 2); “SBI” menu setting
In the “SBI” setting (menu code 5 5 1), non-verified digits displayed are not automatically identified as such.
Be sure to take the steps or make the settings on the auxiliary device for this purpose.
57
To Next Page
Loading...