Need help?Do you have a question about the Sartorius Gem GE2102 and is the answer not in the manual?
General| Maximum Capacity | 2100 g |
|---|---|
| Readability | 0.01 g |
| Repeatability (Std. Dev.) | 0.01 g |
| Calibration | External |
| Display | LCD |
| Weight | 1.5 kg |
| Power Supply | AC adapter or batteries |
| Weighing Units | g, kg, lb, oz |
| Stabilization Time (typical) | 2 seconds |
| Interface | RS-232 |
Qualification and safety requirements for service personnel.
Procedures for adjusting off-center load and span.
Step-by-step guide to activate the BPI mode for service software connection.
Procedure for adapting the strain-gauge load receptor to the operating range.
Method to check repeatability and identify causes for exceeding tolerance limits.
Procedure to check off-center loading error at different positions.
Method for adjusting off-center errors by filing or using screws.
Guides on span adjustment using service software or calibration weights.
Procedures for checking and adjusting linearity for double lever systems.
Method to check repeatability for double lever systems and identify potential issues.
Procedure to check off-center error for triangular and square weighing pans.
Detailed steps for adjusting off-center error using adjustment screws.
Method using 3-point measurement to determine and adjust off-center loading error.
Lists common error codes, their causes, and recommended solutions.
To Next Page