To Next PageTo Next Page
Need help?Do you have a question about the Sartorius Genius Series and is the answer not in the manual?
Identifies the product line of the balance.
Specifies the particular models covered by the operating instructions.
Explains the various symbols used throughout the manual.
Outlines conventions used for pictures, text, and operation.
Provides essential safety guidelines for balance operation and handling.
Describes the main components of the Genius balance.
Explains how to combine different application programs.
Details the function and operation of the balance keys.
Explains the function and labeling of soft keys.
Describes the different display areas for weights, metrology, and bar graphs.
Explains symbols for tare memory, application pictograms, text line, and soft keys.
Describes the structure and sections of the setup menu display.
Covers input via PC, bar code scanners, foot or hand switches.
Explains data output options, error codes, and storing settings.
Specifies conditions for storage and shipping of the balance.
Provides instructions for unpacking and safely carrying the balance.
Lists all components included with the balance.
Covers installation, linearization after transport, conditioning, and setup.
Explains how to operate the display and control unit remotely.
Details the setup procedures for ME5, SE2, ME5-F, SE2-F, and left-handed persons.
Details connecting the balance to AC power and related considerations.
Covers battery charging, safety precautions, peripheral connection, and warmup time.
Covers antitheft device, balance leveling, language, and date/time settings.
Mentions setup menu items, features, and factory settings.
Explains how to select the display language for the balance.
Covers navigating the setup menu and the procedure for exiting it.
Provides a step-by-step guide for entering the time and date.
Describes the purpose, features, and factory settings of balance functions.
Covers exiting setup and printing parameter settings.
Provides a detailed overview of all available balance functions and their settings.
Covers purpose, features, factory settings, and password management.
Provides detailed steps for entering or changing the device password.
Covers handling passwords, extra functions, and printing settings.
Details serial and printer interface configurations, including communication modes and connectors.
Covers display contrast, digit size, application symbols, CF function, and key blocking.
Lists application groups, features, and factory settings.
Covers exiting setup and printing parameter settings.
Details parameters for Application 1, including weight units and display accuracy.
Details parameters for Counting, Percent weighing, Animal weighing, and Recalculation.
Details parameters for Calculation, Density, and Differential Weighing.
Details parameters for Differential Weighing, Air Buoyancy, and Diameter Determination.
Details parameters for Checkweighing and Time-controlled functions.
Details parameters for Totalizing and Formulation applications.
Details parameters for the Statistics application.
Details parameters for extra functions like 2nd tare memory, Identification codes, SQmin, etc.
Covers purpose, features, factory settings, and preparation steps for printout.
Explains exiting setup and printing parameter settings.
Details printout parameters like application-defined output, automatic output, and interface ports.
Covers purpose, features, and methods of generating printouts.
Explains exiting configuration and printing select/list settings.
Covers procedures for displaying information on different balance models.
Mentions factory settings related to device information.
Covers purpose, features, and soft keys for basic weighing.
Provides instructions for analytical weighing, including handling static and magnetic samples.
Details below-balance weighing and initial operation preparation.
Covers additional functions, calibration, setup, turning off, and simple weighing examples.
Covers opening, closing, features, and model-specific operation of the draft shield.
Details assigning open door functions and configuring draft shield settings.
Covers purpose, features, factory settings, and configuration of the ionizer.
Details serial ports, printer ports, and external switch connections.
Covers password, user ID, and clock settings related to device parameters.
Details control port function and pin assignment charts.
Covers display configuration, key assignments, acoustic signal, and power-on mode.
Covers purpose, features, and legal metrology requirements for calibration.
Lists the default parameters for calibration and adjustment.
Details steps to prepare for calibration/adjustment and lists available functions.
Explains how to release access for external calibration.
Explains how to select calibration parameters, including external calibration with factory settings.
Describes the internal calibration, adjustment, and linearization procedures.
Covers sequence choices and external calibration with user-defined weights.
Provides steps to define the calibration weight for external calibration.
Covers isoCAL prompts, activation conditions, set times, and switching off.
Covers data block printout, GLP headers/footers, and examples.
Covers definition, purpose, features, and preparation for the reproTEST.
Provides steps to perform the repeatability test.
Covers restoring factory settings and configuring auto-start applications.
Explains soft key functions and using applications with verified balances.
Covers purpose, features, factory settings, and preparation for switching units.
Covers additional functions and provides an example of unit toggling.
Covers purpose, features, factory settings, and soft keys for the counting application.
Covers preparation steps and reference sample updating.
Lists additional functions like calibration, setup, and turning off the balance.
Covers purpose, features, factory settings, and soft keys.
Covers preparation steps and calculation equations.
Lists additional functions related to this application.
Covers purpose, features, factory settings, soft keys, and printout.
Covers preparation, decimal places, and additional functions.
Covers purpose, features, factory settings, and soft keys for density determination.
Provides the mathematical formulas used for density calculation using different methods.
Covers preparation, method settings, printout options, and additional functions.
Provides a detailed overview of the application's features, sequences, and output options.
Explains the four weighing sequences and their factory settings.
Covers automatic and manual printout generation for differential weighing.
Details preparation steps and various parameters for differential weighing.
Covers equations, key functions, soft keys, and direct selection methods.
Describes the different display pages within the list function.
Details the statistics display page and how to select statistics.
Visually illustrates how to navigate between list display pages.
Covers viewing and printing lots, samples, values, and results.
Explains the procedure for deleting or omitting lots and samples.
Covers purpose and features of buoyancy correction.
Explains the process of determining air density.
Covers factory settings, soft keys, and a diagram for air buoyancy correction.
Provides the mathematical formulas for calculating air buoyancy correction.
Covers preparation steps and configuration options for air buoyancy correction.
Lists additional functions related to this application.
Explains the two methods for obtaining air density values.
Provides the mathematical formulas for air density calculation.
Covers purpose, features, soft keys, and preparation steps.
Lists additional functions related to this application.
Covers purpose, features, factory settings, soft keys, and printout.
Covers preparation steps and additional functions.
Covers purpose, determined values, application combinations, and features.
Lists soft keys and explains the statistics printout format.
Covers factory settings, soft keys, and printout details for statistics.
Covers preparation steps and additional functions for statistics.
Provides a detailed step-by-step guide for the example scenario.
Covers purpose, features, factory settings, soft keys, printout, preparation, and legal metrology use.
Covers purpose, features, factory settings, soft keys, and printout of ID codes.
Covers preparation steps, printout settings, and entering ID names.
Covers purpose, features, factory settings, and preparation for manual saving.
Covers purpose, features, factory settings, and preparation steps.
Covers purpose, features, factory settings, soft keys, and preparation.
Covers purpose, features, factory settings, and preparation for the SQmin function.
Covers purpose, features, display options, key assignment, resolution, printout, and preparation.
Summarizes possible combinations of Application 1, 2, and 3 programs.
Demonstrates combining density determination with statistical evaluation through an example.
Describes the three options for data output.
Covers display sections, metrological data, and bar graph overview.
Covers measured values, weight units, tare memory, application symbols, text line, soft keys, and balance info.
Covers purpose, features, compatible devices, and factory settings for interfaces.
Explains the preparation steps for configuring interfaces.
Details all configurable printout parameters and their settings.
Covers purpose, features, weight ID, application parameters, ISO/GLP, animal weights, and interface optimization.
Details output to interface ports, printer interface, compatible devices, and print modes.
Covers initialization values, ISO/GLP printouts, and printouts for legal metrology.
Explains automatic printing, its conditions, and configuration settings.
Covers GLP headers, footers, operating with logging devices, settings, and ending printouts.
Covers purpose, features, factory settings, and preparation for the serial port.
Explains the preparation steps for configuring the serial port.
Covers output format options, examples, decimal values, and control information.
Details ID code characters, data output formats, special codes, and error codes.
Details formats and meanings of control commands, including draft shield commands.
Covers handshake modes, data transmission sequences, transmitting/receiving devices, and activating data output.
Details pin assignments for 25-pin and 9-pin RS-232 connectors.
Covers connecting scanners/keyboards and pin assignments for DIN connectors.
Provides a diagram for interfacing a computer or peripheral device with the balance.
Lists error codes, their causes, and corresponding solutions.
Covers service, repairs, and general warnings.
Details cleaning instructions for the balance and weighing chamber.
Covers safety inspection for the AC adapter and related recommendations.
Provides guidance on recycling the balance packaging.
Illustrates the balance with numbered components and lists spare parts.
Illustrates the ME5 and SE2 balances with numbered components and lists parts.
Details specifications for standard models, including weight units and application programs.
Details specifications for additional standard models, including weight units and application programs.
Details specifications for ME5, SE2, ME5-F, SE2-F models, including weight units and applications.
Details specifications for verified models with EC type approval, including weight units and applications.
Details specifications for ME614S, ME414S, ME254S verified models, including weight units and applications.
Details specifications for ME5-0CE and SE2-0CE verified models, including weight units and applications.
Lists optional accessories like printers, battery packs, displays, kits, and weights with their order numbers.
Lists software, interface connectors, switches, weighing accessories, and consoles.
Covers directives for legal metrology and Sartorius' EC verification services.
Discusses the validity and process of subsequent verifications within European countries.
Details compliance with Council Directives for electromagnetic compatibility and electrical safety.
Details type conformity to the directive for non-automatic weighing instruments, including model specifications and CE marking.
Provides details of the EC type-approval certificate issued by PTB.
Explains the meaning of markings like K, M, and T on the balance.
Shows examples of descriptive plates for verified instruments and model designations.
Explains markings on balances, including CE marking and metrology stickers.
Shows examples of descriptive plates for weighing modules and operator terminals.
Details the steps for entering or changing the general password.
General