103
Example: Animal Weighing with Statistics (Averaging)
Let’s suppose that you need to determine each weight of 7 very small animals and statistically evaluate and print them.
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Application 1: Animal weighing: Printout: No
Setup: Application parameters: Application 3: Statistics: Automatic storage: On, first value at stability
Setup: Application parameters: Application 3: Statistics: Minimum load for automatic storage: 100 digits
Setup: Application parameters: Application 3: Statistics: Evaluated values: Calculated
Setup: Application parameters: Application 3: Statistics: Evaluation mode, MR function: Intermediate eval., display+print
Setup: Application parameters: Extra function(F4): Man. store in app. 3 memory (M+)
Step Press key(s) (or follow instructions) Display/Output
1. Prepare a container Place empty container
on the balance
2. Tare the balance t
3. Enter number of subweighing 2 0
operations for averaging
4. Save number
mDef soft key
5. Weigh 1st animal Place 1st animal in container Weight fluctuates because of animal activity
6. Start automatic animal weighing
Start soft key
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com