114
Example
Determine the Contents of Bottles: Bottle weight = 100 g.
Settings (changes in the factory settings required for this example):
Setup: Application parameters: Extra function (F4): 2nd tare memory: Automatic printout: Tare/preset tare
Step Press key(s) (or follow instructions) Display/Output
1. If necessary: turn on the balance e
and enter the settings given above
2. Enter bottle weight 5 0
(example: 50 g)
3. Store tare value
PT1 soft key
4. Determine net weight of bottles Place filled bottles
(in this case: net contents = 125 g) on the balance
To Next Page
Loading...
