146
Pin Assignment for the 5-Contact DIN Female Connector:
Pin1: Keyboard Clock
Pin2: Keyboard Data
Pin3: Not Connected
Pin4: Signal GND
Pin5: +5 V
!The YRB02FC bar code scanner requires an external power source if you have
connected a printer and a second display to the balance.
The PC keyboard also requires an external source of power.
Cabling Diagram
Diagram for interfacing a computer or different peripheral device to the balance using the
RS-232/V24 standard and cables up to 15 m (~50 ft.) long
No other pins may be assigned in the balance.
Type of cable: AWG 24 specification
To Next Page
Loading...
