14
! Do not lift the balance by the draft shield or the front panel, as this can result
in damage.
§ Set up the balance at the place of installation.
§ Open the draft shield doors.
§ Remove the retainers (1) securing the display and control unit and remove the front
draft shield panel.
§ Remove the foam padding (2) from the draft shield.
! Save the box and all parts of the packaging in case it should become necessary to
transport the balance over a long distance. Only the original packaging provides the
best protection for shipment (see also “Transporting the Balance on page 20“).
Before packing the balance, unplug all connected cables to prevent damage.
Equipment Supplied
The following individual components
are supplied:
ME215/235/254/414/614
– Balance
– AC adapter with power cord
– Weighing pan with hanger for below-
balance weighing
– Shield disk
– Dust cover for the balance housing
– Dust cover for the display and control
unit
– Instruction manual
ME5, SE2
– Weigh cell
– Draft shield
– Electronic evaluation unit
– Connecting cable
– AC adapter with power cord
– Accessories kit
The accessories kit includes:
– Weighing pan
– Shield disk
– Interior draft shield (only for SE2)
– Brush
– Forceps
– Cloth
ME36S
– Weigh cell
– Electronic evaluation unit
– AC adapter with power cord
– Weighing pan
– Shield disk
ME5-F, SE2-F
– Weigh cell
– Draft shield cover
– Shield ring
– Electronic evaluation unit
– Connecting cable
– AC adapter with power cord
– Accessories kit
The accessories kit includes:
– Filter pan, 50 mm d
– Weighing pan
– Shield disk
– Interior draft shield (only for SE2)
– Brush
– Forceps
– Cloth
1
1
2
To Next Page
Loading...
