Sartorius ME5-0CE - Application 3: Totalizing and Formulation; Totalizing Automatic Storage and Minimum Load; Totalizing Source of Data and Evaluated Values; Totalizing Evaluation Mode and Printout

Setup – Application 3 ο Off
Application (Data records)
parameters Totalizing* Automatic storage ο Off
On, first value at stability
On, last value at stability
On, value bet. 70% – 130%
at stability
Minimum load for None
automatic storage 10 digits
ο 20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Source of data for auto storage ο Application 1
Application 2
Evaluated values ο Net
Calculated
Net + calculated
Evaluation mode,
MR function ο Intermediate evaluation, print
Final evaluation, print
Intermediate evaluation,
display+print
Final evaluation,
display+print
M+/M– function, then tare ο Off
On
Printout of individual No
components ο Yes
Formulation* Automatic storage ο Off
On, first value at stability
Minimum load for None
automatic storage 10 digits
ο 20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Source of data for ο Application 1
automatic storage Application 2
Evaluated values ο Net
Calculated
Net + calculated
Evaluation mode, MR function ο Intermediate evaluation, print
Final evaluation, print
Printout of individual No
components ο Yes
* = How to run this application is described in detail in our Masterpro “LA….” Installation and Operating Instructions.
Request your copy directly from Sartorius or download it from the Internet (www.sartorius.com; see “download”)
31
Factory setting
Factory setting