Purpose
This menu item enables you to
configure the balance functions, i.e.,
to meet individual requirements by
selecting predefined parameters in the
Setup menu. You can block access to
the menu by assigning a password.
Features
The balance functions are combined in
the following groups
(1st menu level):
– Calibration | adjustment
– Adapt filter
– Application filter
– Stability range
– Taring
– Auto zero
– Weight unit 1
– Display accuracy 1
– Tare/zero with power on
– Factory settings: only wgh. param.
(only the balance functions)
For legal metrology, the selection
of individual parameters is limited.
Factory Settings
Parameters: The factory settings are
identified by the symbol “o” in the list
starting on page 19.
Preparation
Show available balance functions:
§ Select Setup menu: press the s key
> SETUP is displayed
§ Select “Balance functions”:
press the
O soft key
If you already assigned a password:
> The password prompt is displayed
$ If access is blocked by a password:
enter the password using the numeric |
alphabetic keys
$ If the last character of the password is
a letter: conclude input by pressing a
§ Confirm your password and have
the balance functions displayed:
Press the
l soft key
> Balance functions are displayed:
$ To select the next group:
press the
q soft key (down arrow)
$ To select the previous item of
a group: press the
Q soft key
(up arrow)
$ To select the next sub-item within
a group:
press the
O soft key (right arrow)
$ To select the previous group:
press the
o soft key (left arrow)
$ To confirm: press the
l soft key
Extra Functions
§ Exit the Setup menu:
press the
oo soft key
> Restart your application
§ Print parameter settings:
– When the balance functions are
displayed, press p/r
> Printout (example)
Texts with more than
20 characters are cut off
SETUP
BAL. FUNC.
--------------------
Calibration/adjustm
CAL/isoTST key fun
Selection mode
Cal/adjustment seq
Calibrate, then auto
adjust
isoCAL function
On without resetting
app.
Start automatic ad
isoCAL
Print GLP/GMP adju
Automatic if GLP is
selected
Parameter for exte
Wt. ID (W ID):
Cal./adj. wt:
200.00000 g
Adapt filter
Normal vibration
Application filter
Final readout
Stability range
2 digits
Auto zero
On
Weight unit 1
Grams /g
Display accuracy 1
All digits
--------------------
18
Setting the Balance Functions (BAL.FUNC.)