Example W2
Enter “ABC123” as the sample ID
Note:
– The sample ID generally applies to one weighing operation only
– The ID is deleted after data output
Step Press key(s) (or follow instructions) Display/Output
Initial state (balance unloaded)
(ID can also be entered while
balance is loaded)
1. Select alphabetic input a
2. Select the required letter group “A”
ABCDEF soft key
3. Enter the letter “A”
A soft key
(To delete a letter: c, c)
4. Select the letter group and
ABCDEF soft key
enter “B”
B soft key
5. Select the letter group and
ABCDEF soft key
enter “C”
C soft key
(If you enter only letters,
conclude input a)
6. Enter the numbers 1, 2 and 3 1 2 3
7. Store the ID
S ID soft key
(20 characters max.)
– The next printout will include
the sample ID
42
To Next Page
Loading...
