116 Cubis MSA User Manual
Parts Counting
Execute Task: Parts Counting by Entering the Piece Weight
D t If you haven’t already done so, go to Application Management.
y The task selection is displayed.
t Touch the desired task.
or
t If the desired task is already selected, touch 5VCTV.
y The last used piece weight wRef is displayed.
t Enter the piece weight of the reference object (e. g. 50 g).
y The reference piece quantity and the entered piece weight are displayed.
t Place the sample with the objects to be counted on to the weighing pan.
y The determined piece count is displayed.
t To display the weight of the sample, touch 9GKIJ.
y The weight of the sample is displayed.
t To toggle between the display of weight value and piece count, touch
%QWPV or 9GKIJ.
t To count the next quantity of objects, empty the weighing pan and place the
next sample on to it.
y The weighing result is updated immediately.
t To display the piece count of this sample, touch %QWPV.
To Next Page
Loading...