Need help?Do you have a question about the Sartorius MSE10202S and is the answer not in the manual?
General| Maximum Capacity | 10200 g |
|---|---|
| Capacity | 10200 g |
| Readability | 0.01 g |
| Pan Size | 386 x 246 mm |
| Dimensions | 490 x 300 x 98 mm |
| Stabilization Time (typical) | 1.5 s |
| Calibration | Internal |
| Repeatability (Std. Dev.) | 0.01 g |
| Interface | RS-232 |
| Operating Temperature | 10-30 °C |
| Linearity | ±0.02 g |
Warns about using the equipment in hazardous areas with explosive materials.
Details electrical safety precautions, including adapter and cord checks.
Covers hazards like static electricity, glass breakage, hazardous materials, and magnetic fields.
Provides step-by-step instructions for safely unpacking the balance.
Details how to select a proper setup location, avoiding negative environmental influences.
Instructions for removing the balance with a draft shield from its packaging.
Instructions for removing the balance without a draft shield from its packaging.
Step-by-step guide for installing the analytical draft shield and assembling the balance.
Instructions for assembling the draft shield for milligram balances.
Guide for assembling milligram balances without a glass draft shield.
Instructions for assembling precision balances without a draft shield up to 15 kg.
Specific instructions for placing the weighing pan on models with a weighing range of 20 kg and above.
Describes how to connect the weigh cell to the electronics module using the provided cable.
Details how to connect the balance to the power supply, including voltage and plug checks.
Important safety notes regarding the AC adapter's grounding and data port connections.
Reiteration of the importance of leveling and how to do it with the inclination sensor.
Instructions on preparing the balance for weighing below the weighing cell.
Detailed description of the balance's display and control panel elements and their functions.
Explains the basic weighing procedure, including taring and printing.
A simplified step-by-step guide for performing the first weighing operation.
Explains the importance of leveling and how to use the level indicator for accurate results.
Step-by-step guide for manually leveling the balance using the leveling feet.
Explains the purpose and features of calibration and adjustment procedures.
Describes how to perform internal calibration using the balance's built-in motorized weight.
Details the automatic calibration and adjustment function, including triggering conditions and configuration.
Provides detailed steps and key functions for performing internal calibration.
Explains how to perform external calibration using a standard weight.
A detailed overview of the balance's menu structure, organized by levels and parameters.
A comprehensive overview of parameter settings, indicating factory and user-defined options.
Overview of available application programs like Weighing, Counting, and Calculation.
Explains how to determine the density of solid materials using the buoyancy method.
Explains how to count parts with approximately equal weight.
How to obtain weight readouts in percent relative to a reference weight.
Explains how to calculate weight values using a multiplier or divisor.
How to determine weights of unstable samples by averaging multiple measurements.
How to weigh different components to a defined total weight.
How to add mutually independent weight values to a total exceeding balance capacity.
How to change the displayed weight unit to one of four application weight units.
Information on connecting the balance to a PC via USB, including system requirements and software drivers.
Step-by-step instructions for connecting the balance to a computer using a USB cable.
Guide for installing the necessary software drivers for USB connectivity.
How to define data output parameters for print commands or automatic synchronization.
How the computer can send control commands to the balance using SBI commands.
Lists SBI commands and their corresponding actions/functions for controlling the balance.
Instructions for configuring and establishing a connection with a Bluetooth® printer.
Detailed instructions for cleaning the balance, including safety precautions and IP protection considerations.
Guidelines for inspecting the balance and AC adapter for safe operation.
Lists verified model data for precision balances with EC type approval.
To Next Page