Need help?Do you have a question about the Sartorius MSE20201S and is the answer not in the manual?
General| Readability | 0.1 g |
|---|---|
| Repeatability (Std. Dev.) | 0.1 g |
| Pan Size | 400 mm x 300 mm |
| Power Supply | AC Adapter |
| Display | LCD |
| Stabilization Time (typical) | 1.5 s |
| Operating Temperature | +10°C to +30°C |
| Linearity | 0.2 g |
| Calibration | External |
| Interface | RS-232 |
Step-by-step instructions for safely unpacking the balance from its packaging.
Guidance on selecting the proper setup location, avoiding negative influences like heat and drafts.
Instructions on acclimatizing the balance to prevent condensation damage when moving between environments.
Detailed instructions for assembling various balance models, including draft shields and components.
Procedure for connecting the weigh cell to the electronics module/evaluation unit securely.
Guidance on leveling the balance using inclination sensors or motorized leveling feet for accurate results.
Information on calibrating and adjusting the balance for accurate measurements.
Explanation of the balance's display elements, keys, and symbols for user interface navigation.
Instructions on performing basic weighing operations, including taring and printing results.
A simplified step-by-step guide for performing the initial weighing process on the balance.
Instructions for determining the density of solid materials using the buoyancy method.
Guide to using the counting application for determining the number of parts with equal weight.
Procedure for obtaining weight readouts in percent relative to a reference weight.
Instructions for calculating weight values using a multiplier or divisor for unit area or 'gsm'.
Guide for determining weights of unstable samples by calculating an average over multiple cycles.
Procedure for weighing different components to achieve a defined total weight.
Instructions for adding successive weight values to a total exceeding the balance capacity.
Guide on changing the displayed weight value between different units and accuracies.
Details on connecting the balance to a PC via USB, including system requirements and driver installation.
Configuration options for data output parameters, including print commands and automatic output.
Explanation of SBI commands for sending control commands to the balance.
Instructions for safely cleaning the balance, including the weighing chamber and external parts.
To Next Page