Need help?Do you have a question about the Sartorius MSE225S and is the answer not in the manual?
General| Maximum Capacity | 220 g |
|---|---|
| Display | LCD |
| Readability | 0.001 g |
| Repeatability | 0.1 mg |
| Linearity | 0.2 mg |
| Calibration | Internal / External |
| Power Supply | AC adapter / Battery |
| Weighing pan size | 90 mm |
| Interface | RS232 |
| Stabilization time (typical) | 2 seconds |
Warning against using the equipment in hazardous areas with explosive materials.
Emphasizes proper power connection and handling of damaged components.
Step-by-step guide on how to unpack the balance safely.
Guidance on selecting a proper setup location and avoiding negative influences.
Step-by-step guide for manual leveling using leveling feet.
A simplified step-by-step guide for initial weighing.
Steps to perform internal calibration using the built-in weight.
Overview of available interfaces on Cubis balances.
How to connect the balance to a PC via USB.
Step-by-step guide for connecting the balance via USB.
To Next Page