Getting Started
Connecting Electronic Devices (Peripherals)
t Make absolutely sure that the device is unplugged from the power supply
before connecting/disconnecting any peripheral device (printer, scanner, PC) to
or from the data port�
3
A device connected to the power supply should never be opened�
Anti-theft Locking Device (Accessory)
Balances with a readability of ≤ 0�01 mg
t An anti-theft locking device can be installed to the back of the balance if
required�
Balances with a readability of ≤ 1 µg
To fasten an antitheft locking device, use the lug located on the back of the weigh
cell�
20 Cubis MSE Operating Instructions
To Next Page
Loading...