Need help?Do you have a question about the Sartorius MSE36201S and is the answer not in the manual?
General| Readability | 0.1 g |
|---|---|
| Calibration | External |
| Display | LCD |
| Linearity | ±0.2 g |
| Stabilization Time | 1.5 s |
| Material | Stainless steel |
| Interface | RS232 |
| Power Supply | AC adapter or rechargeable battery |
| Repeatability | ±0.1 g |
Warning regarding the use of the equipment in hazardous areas with explosive materials.
Instructions to prevent electrical shock, including adapter and cord safety.
Step-by-step guide for safely removing the balance from its packaging.
Guidance on selecting the proper setup location and avoiding negative influences.
Instructions for installing draft shield panels, pan support, and weighing pan.
Guidelines for safely connecting the balance to the power supply and checking compatibility.
Step-by-step guide for performing a standard weighing operation.
Instructions for ensuring the balance is perfectly horizontal for accurate results.
Procedure for performing automatic internal calibration using the built-in weight.
Steps for performing external calibration using a standard calibration weight.
Connecting the balance to a PC via USB, including software driver installation.
Configuration options for data output via print command or automatically.
Using SBI commands to send control commands to the balance.
List of common error codes, their causes, and suggested solutions.
To Next Page