Need help?Do you have a question about the Sartorius MSE125P and is the answer not in the manual?
General| Maximum Capacity | 120 g |
|---|---|
| Readability | 0.1 mg |
| Display | LCD |
| Linearity | ±0.2 mg |
| Interface | RS232 |
| Operating Temperature | 10 °C to 30 °C |
| Power Supply | AC adapter |
| Repeatability | 0.1 mg |
Warns against using the equipment in hazardous areas with explosive materials.
Details precautions related to electrical hazards, including adapter and cord safety.
Guides users through the fundamental steps of performing a standard weighing operation.
Describes how to level the balance using integrated sensors and manual adjustments.
Details the process of performing internal calibration using the balance's built-in weight.
Explains how to use the application to determine the density of solid materials using the buoyancy method.
Guides on determining the number of parts with approximately equal weight using the counting application.
Explains how to obtain weight readouts in percent relative to a reference weight.
Guides on calculating weight values using a multiplier or divisor for unit area or 'gsm'.
Details determining weights of unstable samples by calculating an average over several cycles.
Explains weighing different components up to a defined total, printing individual and total weights.
Guides on adding values from successive weights to a total exceeding the balance capacity.
Explains changing the displayed weight value between different units and their accuracies.
Lists error codes, their causes, and suggested solutions for troubleshooting.
Provides instructions for safely cleaning the balance, including precautions against liquids and dust.
To Next Page