Application Programs
56 Cubis MSE Operating Instructions
Net-total Formulation
Display symbol: +
Purpose
This application can be used to weigh different components up to a defined
total� You can print out both the total weight and the individual weights of the
components�
Features
– Weigh up to 99 components from “0” to a defined total component weight�
– Save component weights (“Store xx comp�”), with
– display zeroed automatically after value is stored, and
– automatic printout
– Clear component memory following cancellation of the weighing sequence by
pressing F and print the total weight�
– Toggle between component weight and total weight by pressing and holding
the S key�
– Print the total of the individual component weights T-Comp)
Preparation
§ Select the “Net-total Formulation” application in the menu:
See “Configuration”
§ Configuring parameters:
Applic. Application programs
Net-Totl. Net-total formulation
Comp.Prt. Printout of components
Off
o On
o = Factory settings
Net-total formulation printout
Comp 2+ 278.1 g : Second component weight
T-Comp+ 2117.5 g : Total components
To Next Page
Loading...