Need help?Do you have a question about the Sartorius MSA6.6S and is the answer not in the manual?
Warning about using the equipment in hazardous areas with explosive materials.
Precautions regarding static electricity, glass breakage, handling hazardous materials, and environmental factors.
Warnings related to electrical hazards, including power connection and damaged components.
Importance and detailed steps for leveling the balance for accurate results.
Instructions for powering the balance on, off, or putting it into standby mode.
A quick guide for performing the first weighing operation on the balance.
Detailed explanation of the touch screen interface in operating and setup modes.
Guidelines for operating the touch screen, including alternative and multiple selections.
Procedures for activating or switching between different user profiles on the balance.
Importance and detailed steps for leveling the balance manually or automatically.
Options for defining calibration/adjustment functions and external check weights.
Programming automatic actions to occur at specific times or intervals.
Explanation of the alibi memory for storing weighing results and its legal metrology requirements.
How to change equipment settings and update software, including balance parameters.
Configuring the automatic Q-Level leveling function for the balance.
Configuring all settings for printing and data output, depending on interface configuration.
Configuring interfaces (serial ports, network) and network settings.
Selecting the operating mode and connection type for the network interface.
Transferring print files to SD card or FTP server, and viewing them in a browser.
Information on how to perform a software update on the balance.
Resetting all individual settings to the factory default values.
Switching alibi memory on/off and setting the interval for automatic deleting.
Lists applications available for configuring new tasks to meet specific requirements.
Detailed example of creating a new task, including application and printout settings.
Defining basic and task-specific print settings, and print events.
Rules and guidelines for combining different applications into a single task.
Steps to start and execute a configured task on the balance.
Steps to configure a new weighing task, including weighing and printout settings.
Steps to configure a task for mass unit conversion, including display accuracy and units.
Steps to configure the SQmin task, including selecting the function and print/save options.
Steps to configure density determination for solids using buoyancy or displacement.
How to execute the density determination task.
How to execute the statistics task, including entering item numbers and placing samples.
How to execute the air buoyancy correction calculation task.
How to execute the diameter determination calculation task.
How to execute the averaging task with a manual start.
How to execute the formulation task, including entering component names and starting the process.
How to execute the weighing in percent task, entering reference values and placing samples.
How to execute the timer-controlled functions task, including entering time or interval.
How to execute the totalizing task, including entering item numbers and placing samples.
Placing an object on the balance to use its weight value as the second tare.
How to execute parts counting with piece weight calculation.
Entering target and tolerance values directly for checkweighing.
Procedure for performing calibration/adjustment using the balance's internal check weight.
Procedure for performing calibration/adjustment using an external check weight.
Steps to make sure the printer is ready and establish a connection to the Bluetooth printer.
Steps to download the software update from the Sartorius website to a computer.
Procedure for uploading the software update to the balance from the SD card.
Requirements for repair work, emphasizing it must be done by trained service technicians.
Indications that safe operation may be compromised and the need for AC adapter inspection.
Instructions for cleaning the balance housing, interior, and draft shield panels.
Instructions for removing items, panels, weighing pan, and pan support for packaging.
To Next Page
General