Sartorius MSA6.6S - Configuring the Network Interface (Ethernet)

48 Cubis MSA User Manual
System Settings (Menu)
Configuring the Network Interface (Ethernet)
For more information on network operation, see chapter Interfaces, section
Network Interface.
t Select operating mode for the network interface.
0QHWPEVKQP/Z$2+ (extended Sartorius communication/5$+(Sartorius standard
protocol)/2TKPVGTQWVRWV/5+%52TQVQEQN
t Select connection type.
5GTXGT or ENKGPVconnection
t Configure the local TCP port.
t To save settings, touch 5CXG.
Configuring Network Settings (Ethernet)
t Define the settings for network operation.
The device name (max. 24 characters) that you define here can be printed on logs.
The IP-Address can be entered as default or obtained automatically.
t To save settings, touch 5CXG.
Configuring Control Inputs/Outputs (e.g. for Remote Switch)
If you have connected a remote switch, for example, via the peripheral or optional
port, you can define its function here.
t Define the setting for each ported interface.