Sartorius MSA6.6S - Configure Task: Determining Density of Liquid

80 Cubis MSA User Manual
Density Determination
Configure Task: Determining Density of Liquid
D
t Select &GVGTOKPGFGPUKV[QHNKSWKF
t Select the measurement conditions
#KTFGPUKV[CV: Measurement takes place under standard laboratory
conditions (20°C room and material temperature).
+PFKXKFWCNGPVT[: If the measurement is to take place under deviating condi-
tions.
t Enter the required values.
t Enter the volume of the glass plummet.
t Select the number of decimal places to be used for the density results.