128 Cubis MSA User Manual
User Management
H t To create a new user profile, touch 'FKV
t Touch %TGCVG.
The program now automatically guides you through the menu. Make your
selections by touching the desired option, the program then takes you to the
next prompt.
or
If the desired option is already selected (dark background), touch 0GZV, to go to
the next prompt.
If more than one option can be selected for a single setting, press 0GZV after
making your selection(s) to proceed to the next prompt.
Step 1: Select language
t Touch the desired language.
Steps 2 to 4: Setting the color and brightness of the display
t To select the background color, touch the desired color.
The standard Sartorius factory setting for the background color is blue.
y The display changes to the color selection for the user field
(see “Display in Operating Mode”).
t Touch the desired color for the user field.
The standard Sartorius factory setting for user fields is dark blue.
y The display changes to the brightness setting.
t To change the brightness of the display, touch the desired setting.
Step 5: Assign user rights
t Select the corresponding options to define which functions the user can access.
The following rights can be assigned individually:
– Creating, copying, modifying and deleting tasks
– Importing data
– Modifying the calibration and adjustment settings
– Modifying the balance settings
– Creating, modiying and deleting timer-controlled actions
Administrators can access all functions.
t To move to the next menu item, press 0GZV.
To Next Page
Loading...