Sartorius MSE6.6 - Application Programs

Configuration (Operating Menu)
Cubis MSE Operating Instructions 41
Info for
Level 1 Level 2 Level 3 Level 4 Menu level
4) App- WEIGH. 4� 1�
lic. Unit Toggle 4� 2�
Application
programs
Counting resolut. ο Disp.dig. Display accuracy 4� 3� 1� 1
10 fold 10 times > disp� 4� 3� 1� 2
100 fold 10 times > disp� 4� 3� 1� 3
Ref.Updt. Auto� ο off 4� 3� 2� 1
Reference updating autom.atically 4� 3� 2� 2
percent dec.plcs.  None No decimal places 4� 4� 1� 1
Weighing Decimal places ο 1 dec.pl. 1 decimal place 4� 4� 1� 2
in Percent 2 Dec.Pl. 2 decimal places 4� 4� 1� 3
3 Dec.Pl. 3 decimal places 4� 4� 1� 4
net.tot. comp.prt.  off 4� 5� 1� 1
Net-total Component printout ο On 4� 5� 1� 2
Formulation
Total comp.prt.  off 4� 6� 1� 1
Totalizing Component printout ο On 4� 6� 1� 2
AnimalW. activty.  calm (fluct�: 2% of test obj�) 4� 7� 1� 1
Animal Animal activity ο active (fluct�: 5% of test obj�) 4� 7� 1� 2
Weighing v.active (fluct�: 20% of test obj�) 4� 7� 1� 3
start manual 4� 7� 2� 1
ο auto 4� 7� 2� 2
Calc. Method (Operator) ο Mul. Multiplier 4� 8� 1� 1
Calculation div. Divisor 4� 8� 1� 2
Dec.plcs  none No decimal places 4� 8� 2� 1
Decimal places ο 1 dec.pl. 1 decimal place 4� 8� 2� 2
2 Dec.Pl. 2 decimal places 4� 8� 2� 3
3 Dec.Pl. 3 decimal places 4� 8� 2� 4
Density dec.plcs none No decimal places 4� 9� 1� 1
determination Decimal places ο 1 dec.pl. 1 decimal place 4� 9� 1� 2
2 Dec.Pl. 2 decimal places 4� 9� 1� 3
3 Dec.Pl. 3 decimal places 4� 9� 1� 4
1
) Not available on balances verified for use in legal metrology