EVO1Y1 Operating Instructions 17
Installation
4.3 Installing the Scale
The scale must be disconnected from the power supply for all assembly work.
Inserting the Weighing Pan
t Place the weighing pan onto the scale from above.
4.4 Power Supply
The scale is connected to the power supply via a PC/notebook or using the optional
AC adapter YPS06-USB (see Chapter “13 Accessories,” page 39), which is supplied
with mains adapters for use in various countries.
Power supply via the AC adapter is only required:
− When no PC or notebook is available.
− In exceptional cases, when the output power of the USB interface of the PC or
notebook is not sufficient.
The assembly is described in the following.
4.4.1 AC Adapter Assembly (Optional)
Using the wrong mains adapter may cause fatal electric shock and damage the
equipment.
Never plug the mains adapter into the socket when it is disconnected from the AC
adapter (danger of electrical shock).
t Use the right mains adapter for your mains power supply.
To Next Page
Loading...
