46 EVO1Y1 Operating Instructions
Conformity & Licenses
Mick Gower
Certification Manager, FM Approvals Ltd.
Issue date: 25
th
July 2017
THIS CERTIFICATE MAY ONLY BE REPRODUCED IN ITS ENTIRETY AND WITHOUT CHANGE
FM Approvals Ltd. 1 Windsor Dials, Windsor, Berkshire, UK. SL4 1RS
T: +44 (0) 1753 750 000 F: +44 (0) 1753 868 700 E-mail: atex@fmapprovals.com www.fmapprovals.com
F ATEX 029 (Apr/16) Page 1 of 3
1
TYPE EXAMINATION CERTIFICATE
2
Equipment or Protective systems intended for use in Potentially
Explosive Atmospheres - Directive 2014/34/EU
3
Type Examination Certificate No: FM15ATEX0008X
4
Equipment or protective system:
(Type Reference and Name)
PMA.Evolution EVO1Yab-c and LAB1Yab-c
5
Name of Applicant:
Sartorius Lab Instruments GmbH & Co. KG
6
Address of Applicant:
Otto-Brenner-Straße 20
Göttingen 37079
Germany
7 This equipment or protective system and any acceptable variation thereto is specified in the schedule to this
certificate and documents therein referred to.
8 FM Approvals Ltd. certifies that this equipment has been found to comply with the Essential Health and
Safety Requirements relating to the design and construction of equipment intended for use in potentially
explosive atmospheres given in Annex II to the Directive.
The examination and test results are recorded in confidential report number:
3049975 dated 15
th
July 2015
9 Compliance with the Essential Health and Safety Requirements, with the exception of those identified in
item 15 of the schedule to this certificate, has been assessed by compliance with the following documents:
EN 60079-0:2012+A11:2013, EN 60079-11:2012 and EN 60079-15:2010
10 If the sign ‘X’ is placed after the certificate number, it indicates that the equipment is subject to specific
conditions of use specified in the schedule to this certificate.
11 This Type Examination certificate relates only to the design, examination and tests of the specified
equipment or protective system in accordance to the directive 2014/34/EU. Further requirements of the
Directive apply to the manufacturing process and supply of this equipment or protective system. These are
not covered by this certificate.
12 The marking of the equipment or protective system shall include:
II 3 G Ex ic nA IIB T4 Gc 0 °C Ta 40 °C
To Next Page
Loading...
