Sartorius SE2-F - Saving Values Manually in M+

110
Step Press key(s) (or follow instructions) Display/Output
7. Repeat steps 7 and 8 for:
ID2: LOCATION
ID3: STREET
ID4: LOT
8. Save settings, exit the Setup menu
oo soft key
and select input mode for IDs
ID soft key
9. Enter name of company a ...
(such as Sartorius) see also page 42
10. Confirm input a ,
l soft key
11. Repeat steps 10 and 11 for
LOCATION: GOETTINGEN
STREET: WEENDER LANDSTRASSE
LOT: 15
12. Place the first sample on the Place load on balance
balance (ex.: weight of
110.53214 g)
13. Print weight p/r
(if desired, perform further
weighing operations and print results)
14. When weighing is completed,
ID soft key
delete each ID individually
Delete soft key 4 times
or switch off this function
in the Setup menu
g
Max 210 g
0%
TARA1: Ubernahme PT1
C
L
S
T
d=0.01mg
100%
11053214
F
S
a
d
Cal S-IDID Rekal. Comp.
100
COMPANY SARTORIUS
LOCATION GOETTINGEN
STREET
WEENDER LANDSTRASSE
LOT 15
N +110.53214 g